Two environmentally considerate plastics employed for the bizhub
The two environmentally considerate plastics of Konica Minolta’s proprietary-developed “new polymer alloy recycled PET” and plant-based “bioplastic” are employed in the bizhub 652/552 monochrome MFPs
The advantages of the two environmentally considerate plastics
Konica Minolta’s newly developed polymer alloy recycled PET overcomes the disadvantages of the conventional PET plastic, such as fragility, low fire-resistance and difficulties in injection moulding, and has an attractive appearance to make it a suitable as an inner material for MFPs. Furthermore, it is considered to be a promising environmentally considerate plastic as it is expected to be less costly in the future and is a recyclable material that effectively utilises PET waste. In addition, plant-based bioplastic offers lower environmental impact as it uses less petroleum-based resources and emits less CO2 during its lifecycle than petroleum-based plastic.
What is the new polymer alloy recycled PET
What is bioplastic
The birth of polymer alloy recycled PET
Disadvantages of the conventional environmentally conscious plastic, recycled PET
Plastics made with the conventional recycled PET*2 alone had the disadvantages of fragility, lowfire resistance and difficulties in injection moulding*3. Although inorganic fillers*4 such as glass fibres were used to improve fire resistance, it had a poor appearance.
New processing technology
In order to overcome the disadvantages of the existing recycled PET, and improve the environmental compatibility of polymer*5, polymer alloy*5, which blends the polymer with other polymers, needed to be produced. Konica Minolta tackled this issue by developing a new processing technology that combines the hard-to-blend polymers into polymer alloy. This new processing technology combines polymer design technology with a special kneading technology to enhance the properties of the PET resulting in the development of the new polymer alloy recycled PET that is strong, fire resistant and easy to shape with injection moulding.
Polymer design technology
Special kneading technology
Special kneading technology: The special kneading method, produced from the same principals of kneading dough to make a pie crust, homogeneously mixes different polymers using nanotechnology. This makes it possible to bring out only the best properties of each plastic. Generating polymer fluidity conditions that are different from conventional kneading technologies helps to minimise damage to the polymer even under high shearing force (tearing power).
The birth of polymer alloy recycled PET
Konica Minolta’s advanced chemical processing technology produced the new environmentally considerate “polymer alloy recycled PET”* by uniformly mixing the highly heat resistant polymer into the PET waste, which was difficult to blend with the conventional technology, providing strength, fire resistance and easy injection moulding without the use of inorganic fillers such as glass fibres. This new material is expected to be widely used as its attractive appearance has the potential to be used for various components. Konica Minolta will continue to fully utilise our leading edge processing technology, and develop environmentally considerate plastics from various perspectives.